Recently added item(s) ×

You have no items in your shopping cart.

DJI Spreading Wings S1000+ Octocopter

Price:
PKR 349,999
Availability:

Availability: In stock

DJI
10 - 12 Working Days
1 Year iShopping.pk
Description

Details

iShopping.pk brings you the best price for DJI Spreading Wings S1000+ Octocopter With 1 Year iShopping.pk Warranty and Free Shipping all over Pakistan.

 

 

Description:

Featuring a removable upper center board for easier installation of flight electronics as well as a redesigned power distribution system, the Spreading Wings S1000+ Octocopter with A2 Flight Controller from DJI continues the legacy of the original S1000. The S1000+ is a collapsible, eight-propeller RC helicopter designed to carry a DSLR or similar-sized camera. With a 24-pound maximum takeoff weight, it is intended to serve as a camera platform, allowing professional videographers and photographers to add dynamic aerial shots to their productions. 

The bundle features the DJI A2 flight control system, a collection of hardware components that control mixing, regulate power, provide sensor data, and include a 2.4 GHz DR16 receiver. The flight control system features attitude and GPS attitude flight modes, offering the pilot varying degrees of autopilot intervention depending on skill level and preference. In GPS mode it is possible to hover in a fixed position, which is ideal for capturing static video shots. In attitude mode, the flight controller will use IMU data to keep the aircraft stable, but when hovering it may drift due to inertia or wind currents. The A2 also features return to home, Intelligent Orientation Control, and other features made possible thanks to computerized, GPU-based flight control. The built-in receiver is compatible with Futaba FASST series and DJI DESST series transmitters (radio controllers). Third-party receivers are also supported.

For stabilizing and moving a camera in flight, the S1000 is compatible with any of the Zenmuse Z15 series gimbals. The airframe features a dampened gimbal mounting bracket with a low mounting position. Additionally, the landing gear can be raised, allowing an unobstructed 360° of visibility.

The S1000 is designed to power 6S lithium-polymer batteries. It will support capacities between 10,000 and 20,000mAh, and requires a discharge rate of at least 15C. With a 15,000mAh battery and a take-off weight of 21 pounds, it is estimated to fly approximately 15 minutes. 

Note: This aircraft not ready-to-fly (RTF): Assembly is required, and batteries and a transmitter are not included. Please refer to the S1000+ User Guide for details of required hardware and installation instructions.

 

Technical Specification:

DJI Spreading Wings S1000+ Professional Octocopter

Performance

Takeoff Weight

13.2 lb / 6 kg to 24.2 lb / 11 kg

Motor

Stator Size

1.6 x 0.6" / 41 x 14 mm

Motor Velocity Constant

KV: 400 rpm/V

Maximum Power

500 W

Weight

With Cooling Fan: 5.6 oz / 158 g

Electronic Speed Control (ESC)

Working Current

40 A

Working Voltage

6S LiPo

Signal Frequency

30 to 450 Hz

Drive PWM Frequency

8 kHz

Weight

1.2 oz / 35 g

Propellers

Size

15 x 5" / 38.1 x 12.7 cm

Weight

0.5 oz / 13 g

Frame

Diagonal Wheelbase

41.1" / 1045 mm

Frame Arm Length

15.2" / 386 mm

Center Frame Diameter

13.3" / 337 mm

Center Frame Weight

With Landing Gear Mounting Base, Servos: 3.3 lb / 1.5 kg

Landing Gear Size

18.1 x 20.1 x 12" / 460 x 511 x 305 mm

Flight Control System

Compatibility

A2 or WooKong-M

Gain Value Settings

For A2 Flight Controller

Basic: Roll 120%, Pitch 120%, Yaw 120%

Attitude: Roll 170%, Pitch 170%, Vertical 120%

 

For WooKong-M Flight Controller

Basic: Roll 130%, Pitch 130%, Yaw 120%

Attitude: Roll 180%, Pitch 180%, Vertical 120%

General

Power Requirements

Lithium-Polymer (LiPo):

Power Consumption

Maximum: 4000 W

Hovering: 1500 W at 20.9 lb / 9.5 kg takeoff weight

Operating Temperature

14 to 104°F / -10 to 40°C

DJI A2 Flight Control System for Multi-Rotor Aircraft

Supported ESC Output

400 Hz refresh frequency

Supported Transmitters

With Built-in Receiver: Futaba FASST series and DJI DESST series

Supported External Receivers

Futaba S-Bus, S-Bus2, DSM2

Other DJI Products Supported

Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO

Hovering Accuracy (GPS Mode)

Vertical: ±1.6' / 0.5 m

Horizontal: ±4.9' / 1.5 m

Maximum Wind Resistance

< 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h)

Maximum Yaw Angular Velocity

150 deg/s

Maximum Tilt Angle

35°

Ascent/Descent

±19.7 fps / 6 m/s

Power Requirements

Maximum: 5 W

Typical: 0.3 A at 12.5 V

System Requirements

Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit

Operating Temperature

23 to 140°F / -5 to 60°C

Dimensions

Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mm

IMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mm

GPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mm

LED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mm

PMU: 39.5mm x 27.6mm x 9.8mm

Additional Information

Additional Information

Featured No
Deal Qty No
Old Price No
Reviews

Related Products