Recently added item(s) ×

You have no items in your shopping cart.

Parrot AR Drone Quadcopter Elite 2.0 (Jungle)

PKR 51,249

Availability: In stock

10 - 12 Working Days
1 Year

Details brings you the best price for Parrot AR Drone Quadcopter Elite 2.0 (Jungle) with 1 year warranty and free shipping all over Pakistan. 


Guides & Manuals : 

The Parrot AR.Drone 2.0 Quadcopter Elite Edition with Jungle graphics is a remote controlled, four-propeller quadcopter with an integrated HD 1280 x 720p camera that supports video and still image capture while in flight. The AR.Drone 2.0 Elite Edition includes a lighter outdoor hull for optimal performance as well as an indoor hull that features prop guards. The AR.FreeFlight Control App allows you to use your iOS or Android mobile device to operate the aircraft from the ground as well as capture video and still photos. The device has built-in Wi-Fi to facilitate connection to your smartphone or mobile device, which provides a wireless range of up to 165' depending on conditions. You can use a joystick on your mobile device touchscreen or you can simply tilt and turn your mobile device to control the quadcopter. 

The camera footage can be streamed directly to your mobile device using Wi-Fi for low resolution recording, can be recorded in full quality by inserting a USB flash drive or the Parrot Flight Recorder directly into the AR.Drone for onboard, in-flight recording. The AR.Drone 2.0's other notable features include an autopilot system, access to the AR.Drone Academy, multiple sensors for smooth flying and stability in the air, an onboard 1 GHz ARM Cortex A8 CPU running Linux, and support for acrobatic maneuvers including flips and barrel rolls. The AR.Drone 2.0 is also compatible with other apps including Director Mode, AR.Race 2, AR.Rescue 2 and Astro Drone. 


Controller Modes 

The AR.Freeflight App features the following controller modes:

  • Joypad Mode (ON): Mobile device touchscreen joystick for control
  • Joypad Mode (OFF): Tilt mobile device for control
  • Absolute Control Mode: Lets you activate absolute reference control mode


Supported Apps

AR.Freeflight is the main app used in lieu of a transmitter to operate the AR.Drone from the ground. Additional apps that are supported include: AR.Drone Director Mode App, AR.Race 2 App, AR.Rescue 2 App, and Astro Drone App. In addition, an SDK is available for developers, allowing custom solutions to be created


Integrated Flight Camera

  • HD recording to USB thumb drive or Flight Recorder
  • Captures 720p video at 30 fps in H.264
  • Captures still photos in JPEG
  • 92° diagonal wide angle lens
  • Low-latency streaming to mobile device


Body Shell and Airframe Construction

  • Foam to isolate the inertial center from the engines' vibrations
  • Expanded Polypropylene (EPP) hulls
  • Carbon fiber tubes: total weight 13.4 oz with outdoor hull, 14.8 oz with indoor hull
  • Features 30% fiber charged nylon plastic parts
  • Liquid repellent nano-coating on ultrasound sensors
  • Fully reparable: all parts are designed to be replaced



  • Four brushless inrunner motors
  • Powered by 3 element, 1000 mAh lithium-polymer battery
  • Specific high propelled drag desinged to provide high maneuverability
  • 8 MIPS AVR CPU per motor controller
  • 14.5 watt and 28 500 rpm when hovering
  • Self-lubricating bronze bearings
  • Tempered steel propeller shafts and micro ball bearings
  • Low noise Nylatron gears for 8.625 propeller reductor
  • Rare earth magnets
  • Emergency stop controlled by software
  • Fully reprogrammable motor controller
  • Water resistant electronic controllers


Onboard Electronics : 

Built-in ARM CPU

  • 1 GHz, 32-bit ARM Cortex A8 processor with 800 MHz video DSP (TMS320DMC64x)
  • 1 Gb DDR2 RAM at 200MHz
  • Wi-Fi with b/g/n support


Operating System

 Linux 2.6.32


Flight Data Sensors

  • 3-axis accelerometer with +/- 50mg precision
  • 3-axis gyroscope with 2000°/second precision
  • Pressure sensor with +/- 10 Pa precision (2.6' at sea level)
  • 60 fps vertical QVGA camera for ground speed measurement
  • 3 axis magnetometer with 6° precision
  • Ultrasound sensors for ground altitude measurement


USB Interface 

For connecting Flight Recorder, a thumb drive, and software updates





92° (diagonal) wide angle

Supported Resolution

HD 1280 x 720p (30 fps)


Via Wi-Fi to mobile device 

USB thumb drive or Flight Recorder

Video Format


Photo Format


Streaming Capability

Low latency streaming via Wi-Fi to mobile device



Processor: ARM Cortex A8 (32-bit)

Clock Speed: 1 GHz

GPU: 800MHz DSP (TMS320DMC64x)


Memory Clock: 200 MHz

Operating System

Linux 2.6.32

Wireless Platform

Wi-Fi b/g/n


3-axis accelerometer (± 50 mg precision) 

3-axis gyroscope (2000°/second precision) 

Pressure sensor (± 10 Pa precision / 31.5" (80 cm) at sea level) 

3-axis magnetometer (6° precision) 

Ultrasound ground altitude measurement sensors (effective up to 19.7' (6 m) above the ground) 

Dynamic wind estimation sensor 

3D compass

Ground Speed Measurement

60 fps vertical QVGA camera

I/O Interface

USB 2.0 -- for Flight Recorder, USB thumb drive, and software updates


Motor Type

4 x Brushless inrunner motors

Power Consumption

14.5 W at 28,500 rpm (nominal when hovering)

Flight Controller


Control Method

Android or iOS App

Supported Apps Include: AR.Freeflight (primary), AR.Race 2 App, AR.Rescue 2, and Astro Drone App 

SDK available for custom solutions

System Requirements (App)

Apple iPhone 

Apple iPod touch 

Apple iPad 

Android smartphone or tablet (requires Android 2.2 and above)



Wireless Range

Up to 165' (50.3 m)

Battery Type

3-element lithium polymer rechargeable battery

Battery Capacity

1000 mAh

Battery Life

Up to 12 minutes

Dimensions (L x W)

With Outdoor Hull: 17.76 x 17.76" (451 x 451 mm)

With Indoor Hull: 20.35 x 20.35" (517 x 517 mm)


With Outdoor Hull: 13.4 oz (380 g) 

With Indoor Hull: 14.82 oz (420 g)

Additional Information

Additional Information

Item Status -- Please Select --
Featured No
Deal Qty No
Old Price No